Environmental Protection Seaweed Drying Machine, Seafood Dryer/Kelp Dryer

• Customization: Available
• Type: Dryer
• Voltage: 220V/ 380V
• Model NO.: Double JK03RD
• Power: 9.6kw
• Customized: Customized
• Chamber Size: 7000X2000X2200mm
• Heat Pump Size: 1650X856X1280mm
• Weight: 180X2
• Rated Current: 19.2A(380V), 44A(220V)
• Heating Capacity: 21kw
• Cooling Capacity: 15.6kw
• Dehumidify: 24L/H
• Temperature Range: 8-75c
• Noise: <=75dB(a)
• Function: Heating/ Cooling/ Dehumidify
• Transport Package: Unit Pack in Plywood
• Specification: 1300kg per batch
• Trademark: KINKAI
• Origin: Guangdong, China(Mainland)
• HS Code: 8419310000
• Production Capacity: 2000 Units/Year

Product Description

Environmental protection seaweed drying machine, seafood dryer/kelp dryer

 

Why Choose KINKAI Heat Pump?

Why We can stand in this area for 10 years?
give you the best sevices
provide you the most affordable product with good quality.

KINKAI Dehydrator Use for :
Dry vegetables like  Radish, lettuce, pumpkin, carrots, spinach, cassava etc
Dry fruits like  Apple, lemon, mango slices, dried longan, dried longan etc
Dry meat: fish, Sausage, jery beef, duck, ham ect
Others it can dry noodle, wooden, stick incense, herbs, floers ect.

KINKAI Dehydrator Functions:

Heating drying
Cooling drying
Heating +dehumidify drying

What is Heat Pump Dryer?
A device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical energy, as in a refrigerator.

How it works?
Heat pump dryer is use of reverse Carnot principle .With free air to absorb heat and transfer it to the drying chamber, drying room temperature to achieve improved, with the appropriate humidity and dehumidification equipment to achieve dry materials. heat pump dryer Compressor - heat exchangers - Chokes - heat sink (outside the machine) - Compressor and other devices constitute a refrigerant cycle system. Under the action of the compressor in the refrigerant circulating in the system flow, it is done in the gaseous booster compressor heating process (temperature up to 100 ºC), releasing it into the machine dry in room temperature air heated by the heat, while they have been and converted to liquid cooling flow, when it runs out machines, liquid absorbs heat quickly evaporates once again transformed into a gaseous state, while the temperature dropped to minus 20 ºC-30 ºC, then the air around the heat sink will continuously transferring heat to the refrigerant. Refrigerant continuous cycle to achieve the heat in the air transport to the drying room heating room air temperature to achieve the purpose of dry material.


6 Normal Models of KINKAI Heat Pump Dryer

Recommend Dryer + Drying Chamber Size
Item	Description	Product Capacity	Drying Chamber size
1	One unit JK03RD dryer + drying chamber	300KG/batch	4000x2000x2200mm
2	One unit JK06RD dryer + drying chamber	600KG/batch	6000x2800x2200mm
3	One unit JK12RD dryer + drying chamber	1000KG/batch	6000x3000x2200mm
4	Two units JK03RD dryers + drying chambe	1300KG/batch	7000x2000x2200mm
5	Two units JK06RD dryers + drying chambe	1500KG/batch	10000x2800x2200mm
6	Two units JK12RD dryers + drying chambe	3500KG/batch	10000x3000x2200mm

 Warm prompt: We can make any drying chamber sizes as your required.

KINKAI Drying Cases
How to dry Shrimp with KINKAI dryer
Steaming: Steaming or boiling shrimps in clear water is key to the curing process. Steam fresh shrimps for 10 minutes until they are easy to shell and the color of shrimps turn red from bluish white.
Drying: Shell the steamed shrimps, put them on the plate or rack on an even basis, and dry them at 50-65°C until the moisture content is reduced to 18%.
Inspection: Sort out the dried shrimps into groups and remove other things.
Measurement and packaging: Place them into the packing bags based on measurement after inspection.

How to dry fish with KINKAI dryer
1. The early temperature shall not be too high since the high temperature has a negative impact on drying quality.
2. Fish contain a lot of water, but also fat and grease, so it is very hard to remove water from them. Therefore, control over the speed of dehydration is of importance.
3. Color of cured fish is another important factor.
4. Be ventilated well in the drying process to prevent water vapor from staying on the surface of casings.


Technical Parameters

Model		Unit	JK03RD	JK06RD	JK10RD
Heating capacity		KW	12.00	26.00	35.00
Cooling capacity		KW	7.50	20.00	25.00
Power supply		V/PH/HZ	220/1/50 or 380/3/50	380 / 3 / 50	380 / 3 / 50
Power input	Compressors	KW	2.80	5.30	9.30
	Evaporator Fan motors	KW	0.78	0.78	1.50
	Hot air circulating fan motors	KW	2.00	2.00	2.00
	Dehumidify fan motor	KW	0.37	0.37	0.55
	Auxiliary electric heater	KW	3.00	6.00	9.00
Total Running current		A	35.00 or 20.00	30.00	45.00
Dehumifification amount		L/H	12	25	40
Max. hot air temperature		ºC	75	75	75
Working ambient temperature		ºC	-10 ~45	-10 ~45	-10 ~45
Noise		dB(A)	75	75	75
Hot air circulating fan motors		Power input/qty	250W/unit	250W/unit	250W/unit
		Wind volume	2500m3/H/unit	2500m3/H/unit	2500m3/H/unit
		fan moter quantity	6 units	8 units	8 units
Dimension(L*W*H)		mm	1650*960*1280	1730*1220*1280	2100*1460*1590
Weight	Net weight	Kg	210	385	480
	Gross weight		240	420	540

Buying Guide

Recommend Dryer + Drying Chamber Size
Item	Description	Product Capacity	Drying Chamber size
1	One unit JK03RD dryer + drying chamber	300KG/batch	4000x2000x2200mm
2	One unit JK06RD dryer + drying chamber	600KG/batch	6000x2800x2200mm
3	One unit JK12RD dryer + drying chamber	1000KG/batch	6000x3000x2200mm
4	Two units JK03RD dryers + drying chambe	1200KG/batch	7000x2000x2200mm
5	Two units JK06RD dryers + drying chambe	1500KG/batch	10000x2800x2200mm
6	Two units JK12RD dryers + drying chambe	3500KG/batch	10000x3000x2200mm

Warm Prompt: We can make any drying chamber sizes as you require.

Packing and delivery
1.For heat pump dryer parts with export standred plywood case
2.For whole set dryer machine with 20GP,40GP,40HQ container


Our Service
A. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)

B. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.

C. After-sales service
1, Technical support for your installation, operation and maintenance. 
2, One year's warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.

Any questions about the machine, please feel free to contact.
Contact number: 008613570470153