| Customization: | Available |
|---|---|
| Type: | Dehydrator |
| Voltage: | 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
KINKAI Heat Pump Drying Machine Introduction:
KINKAI heat pump drying oven is a device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical energy, as in a refrigerator.
How Does The Dehydrator Work?
1, Dryer evaporator of refrigerant absorb the air from outside.
2, Then compressor works that make the air temperature rise.
3, Heat exchanger change the hot air into drying chamber.
4, Final material will be dried by the hot air circulating in drying chamber.
Model : JK03RD, JK06RD, JK10RD
Power Supply : 220V/1PH/50HZ or 380V/3PH/50HZ
Heat energy : 75% air source + 25% electric power
Max. Temp : 75ºC
Working Temp : -10~45ºC
Functions : Heating / Cooling / Dehumidify
Dryer Type : 300~2500kg per batch
KINKAI Heat pump drying machine has large capacity and easy to operate characteristics. mainly suitable for dehydrated vegetables, fruits etc.agricultural and sideline products, Chinese herbal medicine as well as chemical materials dry.
KINKAI drying machine consists of a trolley, drying tray, heat exchanger, blower fan, LCD controller cabinet and drying chamber, The entire machine is made of insulation material and stainless steel, fully satisfying food hygiene requirement.
Advantages
1. Energy saving&Environmental protection.
Adopt close dehumidify+circulating drying type,saving operating cost;Without waste gas and waste heat pollution,low noise.
2. Running Stable,operating easily.
PLC+Touch Screen,running stable,operating easily;Adopt PLC control,can setting different drying curve, Suitable for drying different materials.
3. Second waste heat recovery technology(patent).
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 40%.
4. Exact control temperature and humidity.
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 20-80ºC.
5. Recovery volatilized component.
Some kinds of material contain volatilized component,In drying processing,hot and wet air will become condenser water then drain,collect the condenser water so that collect volatilized component.
Applications
Parameters
| Single dryer + drying chamber | ||||
| Model | Unit | JK03RD | JK06RD | JK12RD |
| power input | KW | 4.8 | 8.5 | 15.0 |
| power supply | V/PH/HZ | 380V/3PH,50/60HZ | 380V/3PH,50/60HZ | |
| 220V/1PH,50/60HZ | ||||
| Rated current | A | 9.6A(380V),22A(220V) | 17.0 | 30.0 |
| Heating capacity | KW | 10.5 | 21.0 | 42.0 |
| Cooling capacity | KW | 7.8 | 18.0 | 50.0 |
| Dehumidify | L/H | 12.0 | 25.0 | 50.0 |
| Max. temperature | ºC | ≤75 | ≤75 | ≤75 |
| Working condition | ºC | 0-43 | 0-43 | 0-43 |
| Max.exhause pressure | MPa | 3.0 | 3.0 | 3.0 |
| Noise | dB(A) | 75 | 75 | 75 |
| Power consumption/H | KWH | 4.8 | 8.5 | 15.0 |
| Electric heater | KW | 3.0 | 6.0 | 12.0 |
| Blowing type | / | HORIZONTAL BLOWING 360° | ||
| Dimension of dryer | MM | 1675×860×1280 | 1760×1060×1280 | 2120×1360×1590 |
| Weight | KG | 180 | 285 | 480 |
Recommend Drying Machine+Drying Chamber:
| Dryer material | Galvanized steel (Stainless steel for option) | ||
| Drying chamber material | Polyurethane Two sides: steel |
||
| Heating source | 75% air source + 25% electric | ||
| Brand name | KINKAI | ||
| Model number | JK03RD JK06RD JK12RD | ||
| Recommend dryer + drying chamber size | Description | Product Capacity | Drying Chamber size |
| One unit JK03RD dryer + drying chamber | 300Kg / batch | 4000*2000*2200mm | |
| One unit JK06RD dryer + drying chamber | 600Kg / batch | 6000*2800*2200mm | |
| One unit JK12RD dryer + drying chamber | 1500Kg / batch | 6000*3000*2200mm | |
| Two units JK03RD dryers + drying chamber | 1200Kg / batch | 7000*2200*2200mm | |
| Two units JK06RD dryers + drying chamber | 1500Kg / batch | 10000*2800*2200mm | |
| Two units JK12RD dryers + drying chamber | 3500Kg / batch | 10000*3000*2200mm | |
Warm prompt: We have different drying chamber size for your reference.
Our company
A. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
B. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year's warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
){kind=link}