| Customization: | Available |
|---|---|
| Power Source: | Electric |
| Process: | Concentration and Dry |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
What is KINKAI heat pump brand fruits/vegetables/seafood/herbs etc cabinet dryer?
KINKAI brand heat pump dryer,infact is use of the heat pump technology applying into drying. A Heat pump dryer is the use of reverse carnot principle, absorbing outdoor hot air and transferring them into the drying room, to realize the temperature of drying room, cooperate with relevant equipment to realize the material drying.The heat pump dryer main parts including compressor, heat exchanger , choke, heat absorber - compressor unit constitute a circulation system, etc.Under the action of refrigerant in the compressor circulating in the system.It made within the compressor gas booster heating process (temperature up to 100 ºC), heat release it into the machine-- high temperature heating drying room air, while being cooled and translated into flow liquid when it runs to the outside machine, rapid heat evaporating liquid into a gas again, at the same time, the temperature dropped to minus 30 ºC, 20 ºC, the air surrounding the heat absorber will continue to transfer heat to the refrigerant.The refrigerant cycle is constantly realize heat from the air transport to the drying room heating the air inside the room temperature. 
What Are KINKAI Heat Pump Dryer Machine?
KINKAI Heat Pump Fish Dryer Machine takes advantage of the reversed Carnot principle, absorbing the heat from around and sending the heat to the materials which will be dried. This kind of dryer is mainly composed of heat pump dryer and drying chamber. This dryer will be controlled by touch screen controller, and the temperature can be adjusted. It has low electric consumption.
| Model | Unit | JK03RD | JK06RD | JK12RD |
| Power input | KW | 5.5 | 9.5 | 19.4 |
| Power supply | V/PH/ HZ | 380V3PH,50/60HZ 220V/1PH,50/60HZ |
380V/3PH,50/60HZ | |
| Rated current | A | 11A(380V),25A(220V) | 19.0 | 39.0 |
| Heating capacity | KW | 10.5 | 21.0 | 42.0 |
| Cooling capacity | KW | 7.8 | 18.0 | 32.0 |
| Dehumidify | L/H | 12.0 | 25.0 | 50.0 |
| Max temperature | ºC | <75 | <75 | <75 |
| Working condition | ºC | 0-43 | 0-43 | 0-43 |
| Electric shock protection grade | I | I | I | |
| Max exhause pressure | MPa | 3.0 | 3.0 | 3.0 |
| Noise | dB(A) | 75 | 75 | 75 |
| Power consumption/h | KWH | 4.8 | 8.5 | 15.0 |
| Electric heater | KW | 3.0 | 6.0 | 12.0 |
| Blowing type | / | HORIZONTAL BLOWING 360° | ||
| Dimension of dryer | MM | 1675x860x1280 | 1760x1060x1280 | 2120x1360x1590 |
| Weight | KG | 180 | 285 | 480 |
| Recommend Dryer + Drying Chamber Sizes | |||
| Item | Description | Product Capacity | Drying Chamber Sizes |
| 1 | One unit JK03RD dryer+drying chamber | 300KG/batch | 3160*2070*2200mm |
| 2 | One unit JK06RD dryer+drying chamber | 600KG/batch | 5700*2170*2200mm |
| 3 | One unit JK12RD dryer+drying chamber | 1300KG/batch | 5810*3230*2200mm |
| 4 | Two unit JK03RD dryer+drying chamber | 1200KG/batch | 7510*2070*2200mm |
| 5 | Two unit JK06RD dryer+drying chamber | 1500KG/batch | 10530*2170*2200mm |
| 6 | Two unit JK12RD dryer+drying chamber | 3500KG/batch | 10750*3230*2200mm |
Usually There is three working mode only
1.Drying temperature can rise fast, but dryer cannot discharge moisture air
2.Drying + dehumidify chamber temperature rise and discharge moisture air
3.Cooling
Sometimes, if the dryer cannot control the temperature accurately, please choose Temper + humidity
Drying machine FAQ
1. high pressure protection
A. hot air circulating fans does not working
a1. AC contactor use for hot air circulating fans overloading protection(please check power source whether lack phase/connecting port or voltage not stable)
a2. part of hot air circulating fan not working(check whether the fans have many ON/OFF switch or some fans was burned)
a3. Fan was damaged (replace new fan or uninstall damaged fans)
B.Too much more products on trays or too much more trays on trolleys lead to block hot air (hot air cannot circulating in drying chamber or too slow wind speed, usually two tray's distance at 8-10cm is reasonable).
C. electronic expansion valve throttle opening too small; or jammed.
c1. Controller adjust electronic expansion valve's opening to small automatically(temperature sensor not accurate-change installation place, exchange 1# and 2# sensor's position)
c2. electronic expansion valve does not working(turn valve body)
D. chamber's temperature too high(set lower temperature)
E. refrigerant is not high temperature type, re-fill gas.
2. low pressure protection
A. leak gas(check leak point, repair)
B. weather too cold(expand check time for low pressure protection, or charge low temperature gas, e.g. R22/R417A)
C. electronic expansion valve opening too small(adjust bigger)
3. exhaust temperature too high protection
A. leak gas(check leak point, repair),
B.electronic expansion valve does not working(turn valve body).
4. temperature sensor error(replace new one)
5. discharge moisture too slow or does not discharge moisture A. dehumidify fan was damaged, B. controller go wrong, C. dehumidify fan power
A. Payment Service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)
B. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
C. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year's warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty
){kind=link}