| Type: | Dehydrator |
|---|---|
| Voltage: | 380V |
| Power: | 19.4kw |
| Customized: | Drying Chamber Size |
| Control System: | PLC+Touch Screen |
| Certification: | CCC, Ce, ISO |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Litchi Drying Project
Traditional drying equipment is still involved in some defects in drying litchi. For example, the drying time is too long, the color is inconsistent, energy consumption is too high, and the drying quality can't be guaranteed. For those reasons, we highly recommend you a new-typed drying device, KINKAI litchi dryer, which has satisfied the market.
| How to dry litchi with KINKAI dryer |
| 1. The ratio of fresh to dry varies with the type of litchis. Take 100 kilograms of dried litchis for example. The relative fresh litchi are listed below by type: Nuo Mi Ci: 400-450 kilograms; Xiang Li: 380-420 kilograms; Hei Ye and He Li: 320-360 kilograms. |
| 2. In the first phase, hold the temperature at 65-70°C (when touching the skin, your finger feels hot) for 24 hours; and pack the litchi in the bags to pile up for 2-3 days after cooled. In this phase, litchi needs turning over every two or three hours |
| 3. In the second phase, hold the temperature at 55-65°C, and dry litchi for 10-12 hours. In this phase, turn litchi over each two hours. |
| 4. If litchi is larger, place litchi for 3-5 days after the phase II is over. Dry it for the third time after water in the inner pula continues to ooze outward. |
Product Principle
1, Dryer evaporator of refrigerant absorb the air from outside.
2, Then compressor works that make the air temperature rise.
3, Heat exchanger change the hot air into drying chamber.
4, Final materials will be dried by the hot air circulating in drying chamber.
Product Component
Component Of Main Engine
The Single Type and Double Type
Advantage Of Kinkai Heat Pump Dryer
1.Energy saving & Environmental protection
Adopt close dehumidify + hot air circulating drying type, saving operating cost; Without waste gas and waste heat pollution, low noise.
2.Running Stable, operating easily
PLC + Touch Screen, running stable,operating easily; Adopt PLC control, can setting different dryiing curve, Suitable for drying different materials.
3.Second waste heat recovery technology(patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 70%.
4.Exact control temperature and humidity
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 10-75ºC.
5.Recovery volatilized component
Some kinds of material contain volatilized component, in drying processing, hot and wet air will become condenser water then drain, collect the condenser water so that collect volatilized component.
Technical Parameters
| Single dryer + Drying chamber | ||||
| Model | Unit | JK03RD | JK06RD | JK12RD |
| Power input | KW | 5.5 | 9.5 | 19.4 |
| Power supply | V/PH/ HZ | 380V3PH,50/60HZ 220V/1PH,50/60HZ |
380V/3PH,50/60HZ | |
| Rated current | A | 11A(380V),25A(220V) | 19.0 | 39.0 |
| Heating capacity | KW | 10.5 | 21.0 | 42.0 |
| Cooling capacity | KW | 7.8 | 18.0 | 32.0 |
| Dehumidify | L/H | 12.0 | 25.0 | 50.0 |
| Max temperature | ºC | <75 | <75 | <75 |
| Working condition | ºC | 0-43 | 0-43 | 0-43 |
| Electric shock protection grade | I | I | I | |
| Max exhause pressure | Mpa | 3.0 | 3.0 | 3.0 |
| Noise | dB(A) | 75 | 75 | 75 |
| Power consumption | KWH | 4.8 | 8.5 | 15.0 |
| Electric heater | KW | 3.0 | 6.0 | 12.0 |
| Blowing type | / | HORIZONTAL BLOWING 360° | ||
| Dimension of dryer | MM | 1650x856x1280 | 1650x1056x1280 | 2250x1360x1590 |
| Weight | KG | 180 | 285 | 480 |
| Double dryer + Drying chamber | ||||
| Model | Unit | JK03RD(*2) | JK06RD(*2) | JK12RD(*2) |
| Power input | KW | 11.0 | 18.4 | 32.8 |
| Power supply | V/PH/ HZ | 380V3PH,50/60HZ 220V/1PH,50/60HZ |
380V/3PH,50/60HZ | |
| Rated current | A | 22A(380V),50A(220V) | 37.0 | 66.0 |
| Heating capacity | KW | 21.0 | 42.0 | 84.0 |
| Cooling capacity | KW | 15.6 | 36.0 | 64.0 |
| Dehumidify | L/H | 24.0 | 50.0 | 100.0 |
| Max temperature | ºC | <=75 | <=75 | <=75 |
| Working condition | ºC | 0-43 | 0-43 | 0-43 |
| Electric shock protection grade | I | I | I | |
| Max exhause pressure | Mpa | 3.0 | 3.0 | 3.0 |
| Noise | dB(A) | <=75 | <=75 | <=75 |
| Power consumption | KWH | 9.6 | 17.0 | 30.0 |
| Electric heater | KW | 6.0 | 12.0 | 24.0 |
| Blowing type | / | HORIZONTAL BLOWING 360° | ||
| Dimension of dryer | MM | 1650x856x1280 | 1650x1056x1280 | 2250x1360x1590 |
| Weight | KG | 180(*2) | 285(*2) | 480(*2) |
| Recommend Dryer + Drying Chamber Sizes | |||
| Item | Description | Product Capacity | Drying Chamber Sizes |
| 1 | One unit JK03RD dryer+drying chamber | 300KG/batch | 3160*2070*2200mm |
| 2 | One unit JK06RD dryer+drying chamber | 600KG/batch | 5700*2170*2200mm |
| 3 | One unit JK12RD dryer+drying chamber | 1200KG/batch | 5810*3230*2200mm |
| 4 | Two unit JK03RD dryer+drying chamber | 800KG/batch | 7510*2070*2200mm |
| 5 | Two unit JK06RD dryer+drying chamber | 1500KG/batch | 10530*2170*2200mm |
| 6 | Two unit JK12RD dryer+drying chamber | 3000KG/batch | 10750*3230*2200mm |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}