China Best Small Wood Chips Sawdust Dryer Machine for Sale

• Customization: Available
• Type: Dehumidifier/ Dryer
• Voltage: 220V/380V
• Model NO.: JK06RD
• Power: 8.5kw
• Customized: Customized
• Capacity: 300-3500kg/H
• Temperature Range: 10-75ºC
• Material: SUS304 Stainless Steel/Steel
• Keywords: Low Energy Consumption
• Noise: 40-60dB(a)
• Control System: PLD+Touch Screen
• Dehydration Capacity: 12L/H
• Transport Package: Plywood
• Specification: 1760*1060*1280mm
• Trademark: KINKAI
• Origin: China
• HS Code: 8419310000
• Production Capacity: 800 Set/ Month

Product Description

Product Description

  


Successful Cases

 

How to dry wood with KINKAI dryer

The wood drying equipment which wants to dry wood on a controllable basis must have the three basic functions: heating, adjustment of humanity and ventilation. Heating speaks for itself. Adjustment of humanity is used to provide the high-humanity environment necessary for some phases to prevent wood from cracking and deforming. The ventilation device must ensure that the wet and hot air goes through the pile of wood evenly so as to make the water in the dried wood well-distributed.

In the early drying process, the performance coefficient (COP) of the heat pump unit is high due to high relative humanity of the wood to be dried. As the drying process goes on, the COP will decline due to decrease of the relative humanity, resulting in lower performance of the unite on a negative basis.

1. If the temperature is not high, for example, the low-temperature heat pump is below 54°C, moisture can't be removed from the wood in case the moisture content is below 15%. Generally, it is necessary to raise the drying temperature to 71°C or above.

1. The drying cabinet shall be thermal-insulation and resistant to air loss. In terms of the thermal insulation, the cabinet structure shall have a small thermal capacity to reduce heat loss, which is equal to or less than the mechanical equivalent of heat. No humidifying equipment is installed in the heat pump drying cabinet. If the water vapor overflows, it is definite that the drying condition is hard to change. Therefore, the cabinet shall have good air impermeability.

1. Keep the air flow in the cabinet stable. It is the best if the air speed is 1m/s.

Working Principle
 




Feature
• Old type traditional drying room.

1. Drying process is difficult to meet the requirements of food hygiene.
2. Much coal dust, and finished goods bleak in color. 
3. Need to replace coal midway, large labour intensity.
4. During drying, it generates large plenty of gas such as CO2/SO2/soot, with poor working conditions.
5. Soot gas for the oven equipment corrosion is serious, short service life.
6. The temperature is difficult to achieve automatic control; Temperature and humidity in drying process fluctuation is bigger, affect the drying quality.

• High temperature heat pump drying dehumidifying drying room.
1. Drying process completely meet the requirements of food hygiene.
2. Cleaning and hygiene in the good condition, the finished colour and lustre is bright.
3. Automatic control, reduce the labor and the labor intensity.
4. During drying, there is no water/gas/solids generating, the green environmental protection; Good and comfortable working environment .
5. Long service life, low operating cost, good economy.
6. Temperature and humidity is automatic control; Small fluctuations in the temperature and humidity in drying process, the drying quality is stable and reliable.

Buying Guide  
                  

KINKAI   Single Drying Machine
Model	Unit	JK03RD	JK06RD	JK12RD
Power input	KW	4.8	8.5	15.0
Power supply	V/PH/HZ	380V/3PH,50/60HZ 220V/1PH,50,60HZ	380V/3PH,50/60HZ
Rated curent	A	9.6A(380V),22A(220V)	17.0	30.0
Heating capacity	KW	10.5	21.0	42.0
Cooling capacity	KW	7.8	18.0	32.0
Dehumidity	L/H	12.0	25.0	50.0
Max temperature	ºC	75	75	75
Working condition	ºC	0-43	0-43	0-43
Electric shock protection grade		I	I	I
Max.exhause pressure	MPa	3.0	3.0	3.0
Noise	dB(A)	75	75	75
Power consumption/H	KWH	4.8	8.5	15.0
Electric heater	kw	3.0	6.0	12.0
Blowing type	/	Horizontal blowing 360
Dimension of dryer	MM	1675*860*1280	1760*1060*1280	2120*1360*1590
Weight	KG	180	285	480

Item	Description	Product Capacity	Drying Chamber size	Trolleys Qty	Remarks
1	Single JK03RD	300kg/batch	3160×2070×2200 mm	6	Trolleys size; 810×670×1800mm   Total 16 trays for one trolleys.    Trays size:  750×660mm
2	Single JK06RD	600kg/batch	5700×2170×2200 mm	12
3	Single JK12RD	1200kg/batch	5810×3230×2200 mm	20
4	Double JK03RD	800kg/batch	7510×2070×2200 mm	16
5	Double JK06RD	1500kg/batch	10530×2070×2200 mm	24
6	Double JK12RD	3000kg/batch	10750×3230×2200 mm	40

Warm prompt: We can make any drying chamber sizes as your required.
Packaging & Shipping




Our Services
A. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts) 
B. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
C. After-sales service
1, Technical support for your installation, operation and maintenance. 
2, One year's warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
If you are interested in our heat pump dryer, please contact us for more information, such as catalogue, video,etc.