| Warranty: | 1 Year |
|---|---|
| Type: | Dehydrator |
| Voltage: | 380V |
| Power: | 5.5kw |
| Customized: | Drying Chamber |
| Control System: | PLC+Touch Screen |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Flower Drying Project
Momordica grosvenori has large size and high moisture content. It is a great challenge to dry momordica grosvenori rapidly without any loss of efficacy. KINKAI heat pump dryer can resolve temperature uniformity with its distinct energy-saving drying cabinet and the smart moisture-removing system. Divide momordica grosvenori into super big group and big group, put them separately in the material car and then send into the drying cabinet; start the dryer without stirring them. After several days of smart drying and removal of moisture, all dried momordica grosvenori become golden and lustrous without broken or cracked shells. All dryed nut fruits can be stored for a longer time with high-quality appearance.
Temperature Curve of Drying Momordica grosvenori (Luo Han Guo)
Divide momordica grosvenori which have been saccharified and sweated into three grades, big, medium and small, put them in drying cabinets separately. Start KINKAI air source heat pump dryer to raise the temperature. In the drying process, the temperature goes through three stages, low, high, and low.
| Phase 1 | Remain the temperature at 20°C -24°C in the drying oven to dry momordica grosvenori with high moisture content for 2-3 days while start automatic function of moisture removal to evaporate water gradually. |
| Phase 2 | Raise the temperature gradually to evaporate water. The humanity system will exhaust moisture automatically to remove water vapor. The phase lasts 2-3 days to remove most water. |
| Phase 3 | Reduce the temperature to 55°C -60°C and continue to dry momordica grosvenori for two days to lose their weight to 25-30% of fresh ones. Halt KINKAI air source heat pump dryer to make the dried fruits to cool down naturally. Lastly, take cool momordica grosvenori out of the cabinet. |
Product Principle
1, Dryer evaporator of refrigerant absorb the air from outside.
2, Then compressor works that make the air temperature rise.
3, Heat exchanger change the hot air into drying chamber.
4, Final materials will be dried by the hot air circulating in drying chamber.
Product Component
Component of Main Engine
The Single Type and Double Type
Advantage of Kinkai Heat Pump Dryer
1.Energy saving & Environmental protection
Adopt close dehumidify + hot air circulating drying type, saving operating cost; Without waste gas and waste heat pollution, low noise.
2.Running Stable, operating easily
PLC + Touch Screen, running stable,operating easily; Adopt PLC control, can setting different dryiing curve, Suitable for drying different materials.
3.Second waste heat recovery technology(patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 70%.
4.Exact control temperature and humidity
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 10-75ºC.
5.Recovery volatilized component
Some kinds of material contain volatilized component, in drying processing, hot and wet air will become condenser water then drain, collect the condenser water so that collect volatilized component.
Technical Parameters
| Single dryer + Drying chamber | ||||
| Model | Unit | JK03RD | JK06RD | JK12RD |
| Power input | KW | 5.5 | 9.5 | 19.4 |
| Power supply | V/PH/ HZ | 380V3PH,50/60HZ 220V/1PH,50/60HZ |
380V/3PH,50/60HZ | |
| Rated current | A | 11A(380V),25A(220V) | 19.0 | 39.0 |
| Heating capacity | KW | 10.5 | 21.0 | 42.0 |
| Cooling capacity | KW | 7.8 | 18.0 | 32.0 |
| Dehumidify | L/H | 12.0 | 25.0 | 50.0 |
| Max temperature | ºC | <75 | <75 | <75 |
| Working condition | ºC | 0-43 | 0-43 | 0-43 |
| Electric shock protection grade | I | I | I | |
| Max exhause pressure | Mpa | 3.0 | 3.0 | 3.0 |
| Noise | dB(A) | 75 | 75 | 75 |
| Power consumption | KWH | 4.8 | 8.5 | 15.0 |
| Electric heater | KW | 3.0 | 6.0 | 12.0 |
| Blowing type | / | HORIZONTAL BLOWING 360° | ||
| Dimension of dryer | MM | 1650x856x1280 | 1650x1056x1280 | 2250x1360x1590 |
| Weight | KG | 180 | 285 | 480 |
| Double dryer + Drying chamber | ||||
| Model | Unit | JK03RD(*2) | JK06RD(*2) | JK12RD(*2) |
| Power input | KW | 11.0 | 18.4 | 32.8 |
| Power supply | V/PH/ HZ | 380V3PH,50/60HZ 220V/1PH,50/60HZ |
380V/3PH,50/60HZ | |
| Rated current | A | 22A(380V),50A(220V) | 37.0 | 66.0 |
| Heating capacity | KW | 21.0 | 42.0 | 84.0 |
| Cooling capacity | KW | 15.6 | 36.0 | 64.0 |
| Dehumidify | L/H | 24.0 | 50.0 | 100.0 |
| Max temperature | ºC | <=75 | <=75 | <=75 |
| Working condition | ºC | 0-43 | 0-43 | 0-43 |
| Electric shock protection grade | I | I | I | |
| Max exhause pressure | Mpa | 3.0 | 3.0 | 3.0 |
| Noise | dB(A) | <=75 | <=75 | <=75 |
| Power consumption | KWH | 9.6 | 17.0 | 30.0 |
| Electric heater | KW | 6.0 | 12.0 | 24.0 |
| Blowing type | / | HORIZONTAL BLOWING 360° | ||
| Dimension of dryer | MM | 1650x856x1280 | 1650x1056x1280 | 2250x1360x1590 |
| Weight | KG | 180(*2) | 285(*2) | 480(*2) |
| Recommend Dryer + Drying Chamber Sizes | |||
| Item | Description | Product Capacity | Drying Chamber Sizes |
| 1 | One unit JK03RD dryer+drying chamber | 300KG/batch | 3160*2070*2200mm |
| 2 | One unit JK06RD dryer+drying chamber | 600KG/batch | 5700*2170*2200mm |
| 3 | One unit JK12RD dryer+drying chamber | 1200KG/batch | 5810*3230*2200mm |
| 4 | Two unit JK03RD dryer+drying chamber | 800KG/batch | 7510*2070*2200mm |
| 5 | Two unit JK06RD dryer+drying chamber | 1500KG/batch | 10530*2170*2200mm |
| 6 | Two unit JK12RD dryer+drying chamber | 3000KG/batch | 10750*3230*2200mm |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}