Certifications
Product Parameters
Single dryer + Drying chamber |
Model |
Unit |
JK03RD |
JK06RD |
JK12RD |
Power input |
KW |
5.5 |
9.5 |
19.4 |
Power supply |
V/PH/ HZ |
380V3PH,50/60HZ
220V/1PH,50/60HZ |
380V/3PH,50/60HZ |
Rated current |
A |
11A(380V),25A(220V) |
19.0 |
39.0 |
Heating capacity |
KW |
10.5 |
21.0 |
42.0 |
Cooling capacity |
KW |
7.8 |
18.0 |
32.0 |
Dehumidify |
L/H |
12 |
25 |
50 |
Max temperature |
ºC |
<75 |
<75 |
<75 |
Working condition |
ºC |
0-43 |
0-43 |
0-43 |
Electric shock protection grade |
I |
I |
I |
Max exhause pressure |
Mpa |
3.0 |
3.0 |
3.0 |
Noise |
dB(A) |
75 |
75 |
75 |
Power consumption/h |
KWH |
4.8 |
8.5 |
15.0 |
Electric heater |
KW |
3.0 |
6.0 |
12.0 |
Blowing type |
/ |
HORIZONTAL BLOWING 360° |
Dimension of dryer |
MM |
1650X856X1280 |
1650X1056X1280 |
2250X1360X1590 |
Weight |
KG |
180 |
285 |
480 |
Recommend Dryer + Drying Chamber Sizes |
Description |
Product Capacity |
Drying Chamber Sizes |
One unit JK03RD dryer+drying chamber |
300KG/batch |
3160*2070*2200mm |
One unit JK06RD dryer+drying chamber |
600KG/batch |
5700*2170*2200mm |
One unit JK12RD dryer+drying chamber |
1200KG/batch |
5810*3230*2200mm |
Two unit JK03RD dryer+drying chamber |
800KG/batch |
7510*2070*2200mm |
Two unit JK06RD dryer+drying chamber |
1500KG/batch |
10530*2170*2200mm |
Two unit JK12RD dryer+drying chamber |
3000KG/batch |
10750*3230*2200mm |
Detailed Images
How does our dryer work?
1. Dryer evaporator of refrigerant absorb the air from outside
2. then compressor works that make the air temperature rise
3,.heat exchanger change the hot air into drying chamber
4,.final fruits will be dried by the hot air circulating in drying chamber
How to dry red dates with KINKAI dryer
Preheating: If we directly put red dates in the environment where the temperature is suitable for sugar inversion, the cell orifice in the skin will shrink and their crust will become hard, preventing water from evaporating because the extreme temperature difference makes red dates set off the protective reaction. First, preheat the cabinet completely on a gradual basis to evaporate most of water; and dry red dates at 35°C for 6-10 hours. When the temperature of red dates reaches 45°C, that is, your finger feels hot when touching it, dry them for 7-8 hours. After that, use your finger to press the red date and its skin wrinkles. When the temperature is at 45-48°C, there will be some small water drops on their skin.
Evaporation: Raise the temperature to 65°C (Note: the temperature shall not be higher than 70°C) within 8-12 hours to evaporate most of free water. Removal of moisture contributes to water evaporation. Keep the indoor temperature stable for constant evaporation. The drying process goes well in case the skin wrinkles.
Drying up: When the temperature in the red date is well-distributed, this phase will end within 6 hours. In this phase, moisture content of red dates is not high, and thus more attention shall be paid to temperature control. It is better that the temperature is held at 50°C. At this moment, the humanity has been reduced. If the humanity is higher than 60%, dehumidify a little. Water in red dates become balanced, and red dates are dried well. Note that the dried red dates shall be taken out in time
Cooling: Keep good ventilation and heat dissipation for dried red dates. Pile them up until being cooled. If the dried red dates are just taken out from the cabinet, and directly piled up in the warehouse, their sugars will ferment and go bad, and the pectose will be broken down into pectin and pectic acid due to high heat. Red dates become very soft, and some acid threads are available due to change of sugars. Therefore, don't store dried red dates after they are cooled completely.
Our Services
1) OEM service
2) We provide operating manual and video after you place order.
3) One year's warranty, and you can pay for extended warranty.
4)Spare parts and technical support at most economic prices after the warranty.
After installation,during the guarantee period,our company will be responsible for problems caused by quality of production or raw material except the damageable spare parts of heat pump caused by incorrect man-made operation.
Company Information
Guangzhou Kaineng Electric Co., Ltd. is a high-tech enterprise integrating R&D, production and sales. It has more than ten years of experience in manufacturing dryers. We have a first-class production workshop and production equipment, and an advanced simulation test facility climate laboratory. It is one of the largest heat pump production bases in China.
If you want to know more details of our dryer, you can contact with me as the below information. We are looking forward to hear you soon!