Hot Air Circulating Wood Drying Machine/Timber Dryer Oven

• Customization: Available
• Voltage: 220V/ 380V
• Customized: Customized
• Model NO.: JK03RD
• Heat Pump Size: 1650X856X1280mm
• Weight: 180
• Rated Current: 9.6A(380V), 22A(220V)
• Heating Capacity: 10.5kw
• Cooling Capacity: 7.8kw
• Dehumidify: 12L/H
• Temperature Range: 8-75c
• Noise: 75dB(a)
• Function: Heating/ Cooling/ Dehumidify
• Transport Package: Unit Pack in Plywood
• Specification: 300kg per batch
• Trademark: KINKAI
• Origin: Guangdong, China(Mainland)
• HS Code: 8419310000
• Production Capacity: 2000 Units/Year

Product Description

hot air circulating wood drying machine/timber dryer oven

KINKAI Industrial Dehydrator Introduction:
KINKAI Heat pump dryer takes advantage of the reversed Carnot principle, absorbing the heat from around and sending the heat to the materials which will be dried. This kind of dryer is mainly composed of heat pump dryer and drying chamber. This dryer will be controlled by touch screen controller, and the temperature can be adjusted. It has low electric consumption.



How does it works?
1, Dryer evaporator of refrigerant absorb the air from outside
2, then compressor works that make the air temperature rise
3, heat exchanger change the hot air into drying chamber
4, final vegetables/fruits/seafood/herbs will be dried by the hot air circulating in drying chamber

KINKAI Industrial Food Dehydrator Technical Parameters:

Single Dryer + Drying Chamber
Model	Unit	JK03RD	JK06RD	JK12RD
Power Input	KW	4.8	8.5	15
Power Supply	V/PH/HZ	380V/3PH, 50/60HZ	380V/3PH, 50/60HZ
		220V/1PH, 50/60HZ
Rated Current	A	9.6A(380V),22A(220V)	17.0	30.0
Heating Capacity	KW	10.5	21.0	42.0
Cooling Capacity	KW	7.8	18.0	32.0
Dehumidify	L/H	12.0	25.0	50.0
Max.Temperature	C	<=75	<=75	<=75
Working Condition	C	0-43	0-43	0-43
Electric Shock Protextion Grade		I	I	I
Max.Exhause Pressure	Mpa	3.0	3.0	3.0
Noise	dB(A)	75	75	75
Power Consumption/ H	KWH	4.8	8.5	15
Electric Heater	KW	3.0	6.0	12.0
Weight	KG	180	285	480
Dimension of Dryer	MM	1675x860x1280	1760x1060x1280	2120x1360x1590
Dimension of Chamber	MM	4000x2000x2200	6000x2800x2200	6000x3000x2200
Model Capacity	KG/Batch	300KG/Batch	600KG/Batch	1000KG/Batch

Double Dryers + Drying Chamber
Model	Unit	JK03RD(x2)	JK06RD(x2)	JK12RD(x2)
Power Input	KW	9.6	17	30
Power Supply	V/PH/HZ	380V/3PH, 50/60HZ	380V/3PH, 50/60HZ
		220V/1PH, 50/60HZ
Rated Current	A	19.2A(380V),44A(220V)	34.0	60.0
Heating Capacity	KW	21.0	42.0	84.0
Cooling Capacity	KW	15.6	36.0	64.0
Dehumidify	L/H	24.0	50.0	100.0
Max.Temperature	C	<=75	<=75	<=75
Working Condition	C	0-43	0-43	0-43
Electric Shock Protextion Grade		I	I	I
Max.Exhause Pressure	Mpa	3.0	3.0	3.0
Noise	dB(A)	75	75	75
Power Consumption/ H	KWH	4.8	8.5	15
Electric Heater	KW	3.0(x2)	6.0(x2)	12.0(x2)
Weight	KG	180(x2)	285(x2)	480(x2)
Dimension of Dryer	MM	1675x860x1280	1760x1060x1280	2120x1360x1590
Dimension of Chamber	MM	7000x2000x2200	10000x2800x2200	10000x3000x2200
Model Capacity	KG/Batch	1300KG/Batch	1500KG/Batch	3500KG/Batch

Buying Guide

Recommend Dryer + Drying Chamber Size
Item	Description	Product Capacity	Drying Chamber size
1	One unit JK03RD dryer + drying chamber	300KG/batch	4000x2000x2200mm
2	One unit JK06RD dryer + drying chamber	600KG/batch	6000x2800x2200mm
3	One unit JK12RD dryer + drying chamber	1000KG/batch	6000x3000x2200mm
4	Two units JK03RD dryers + drying chambe	1300KG/batch	7000x2000x2200mm
5	Two units JK06RD dryers + drying chambe	1500KG/batch	10000x2800x2200mm
6	Two units JK12RD dryers + drying chambe	3500KG/batch	10000x3000x2200mm

Drying Application

How to dry wood with KINKAI dryer
1. If the temperature is not high, for example, the low-temperature heat pump is below 54°C, moisture can't be removed from the wood in case the moisture content is below 15%. Generally, it is necessary to raise the drying temperature to 71°C or above.
2. The drying cabinet shall be thermal-insulation and resistant to air loss. In terms of the thermal insulation, the cabinet structure shall have a small thermal capacity to reduce heat loss, which is equal to or less than the mechanical equivalent of heat. No humidifying equipment is installed in the heat pump drying cabinet. If the water vapor overflows, it is definite that the drying condition is hard to change. Therefore, the cabinet shall have good air impermeability.
3. Keep the air flow in the cabinet stable. It is the best if the air speed is 1m/s.

KINKAI Drying Features
1, Energy saving and environment  protection
Adopt close dehumidify + circulating drying type, saving operating cost;
Without waste gas and waste heat pollution, low noise
2, Stable property and operating easily
Touch screen full automatic control
Different materials with different drying type, adopt PLC control, can setting different drying curve, suitable for drying different materials.
3, Second waste heat recovery technology(patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 40%.
4, Accurate control temperature and humidity
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 10~75C.
5, Horizontal Blowing 360ºC
By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so ensure a high drying efficiency and save energy, lead to a uniform drying.
6, It's batch operation, so can adjust process condition anytime. Thus can change product from time to time
7, Dry material in tray, easy for load and unload, not easy cause any damage for the raw material, clean   conveniently.    

Packing and Shipping
For heat pump dryer parts---with plywood
For drying chamber +trolleys
   If shipped with 20ft container or 40ft container, no packing
   If shipped with LCL( less than container load), packed in plywood



Our Service
A. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)

B. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.

C. After-sales service
1, Technical support for your installation, operation and maintenance. 
2, One year's warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.

Certification


If you are interested in our heat pump dryer, please contact us for more information, such as catalogue, video,etc.

Wing

Add: Huadu District, Guangzhou City, Guangdong Province, P.R. China

Phone: [phone]