KINKAI Vegetable Dryer Introduction:
KINKAI Heat pump dryer takes advantage of the reversed Carnot principle, absorbing the heat from around and sending the heat to the materials which will be dried. This kind of dryer is mainly composed of heat pump dryer and drying chamber. This dryer will be controlled by touch screen controller, and the temperature can be adjusted. It has low electric consumption.
Model: JK03RD, JK06RD, JK10RD
Power Supply: 220V/1PH/50HZ or 380V/3PH/50HZ
Type: 75% air source + 25% electric power
Max. Temp: 75ºC
Working Temp: -10~45ºC
Functions: Heating / Cooling / Dehumidify
Dryer Type: Batch Type
KINKAI Vegetable Dryer Working Principle:
KINKAI heat pump dryer operates according to a basic reverse Carnot cycle. The working fluid(refrigerant) at low pressure is vaporized in the evaporator, by heat drawn from the dryer exhaust air. The compressor raises the enthalpy of the working fluid of the heat pump and discharges it as superheated vapor at high- pressure. Heat is removed from working fluid and returned to the process air at the condenser. The working fluid is then throttled to the low-pressure line(using an expansion valve) and enters the evaporator to complete the cycle. In the dryer system, hot and dry air at the exit of condenser is allowed to pass through the drying chamber where it gains latent heat from the material. The humid air at dryer exit then passes through the evaporator where condensation of moisture occurs as the air goes below dew point temperature. Then drain the condenser water.
KINKAI Vegetable Dryer Features:
1, Energy saving and environment protection
Adopt close dehumidify + circulating drying type, saving operating cost;
Without waste gas and waste heat pollution, low noise
2, Stable property and operating easily
Touch screen full automatic control
Different materials with different drying type, adopt PLC control, can setting different drying curve, suitable for drying different materials.
3, Second waste heat recovery technology(patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 40%.
4, Accurate control temperature and humidity
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 10~75C.
5, Horizontal Blowing 360
ºC
By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so ensure a high drying efficiency and save energy, lead to a uniform drying.
6, It's batch operation, so can adjust process condition anytime. Thus can change product from time to time
7, Dry material in tray, easy for load and unload, not easy cause any damage for the raw material, clean conveniently.
Technical Parameters
| Single Dryer + Drying Chamber |
| Model |
Unit |
JK03RD |
JK06RD |
JK12RD |
| Power Input |
KW |
4.8 |
8.5 |
15 |
| Power Supply |
V/PH/HZ |
380V/3PH, 50/60HZ |
380V/3PH, 50/60HZ |
| 220V/1PH, 50/60HZ |
| Rated Current |
A |
9.6A(380V), 22A(220V) |
17 |
30 |
| Heating Capacity |
KW |
10.5 |
21 |
42 |
| Cooling Capacity |
KW |
7.8 |
18 |
32 |
| Dehumidify |
L/H |
12 |
25 |
50 |
| Max. Temperature |
ºC |
≤75 |
≤75 |
≤75 |
| Working Condition |
ºC |
0-43 |
0-43 |
0-43 |
| Electric Shock Protection Grade |
I |
I |
I |
| Max. Exhause Pressure |
Mpa |
3 |
3 |
3 |
| Noise |
dB(A) |
75 |
75 |
75 |
| Power Consumption/ H |
KWH |
4.8 |
8.5 |
15 |
| Electric Heater |
KW |
3 |
6 |
12 |
| Blowing Type |
/ |
Horizontal Blowing 360ºC |
| Dimension Of Dryer |
MM |
1675x860x1280 |
1760x1060x1280 |
2120x1360x1590 |
| Weight |
KG |
295 |
385 |
540 |
Recommend Dryer +Drying Chamber Sizes
| Item |
Description |
Product Capacity |
Drying Chamber size |
| 1 |
One unit JK03RD dryer + drying chamber |
300Kg / batch |
4000*2000*2200mm |
| 2 |
One unit JK06RD dryer + drying chamber |
600Kg / batch |
6000*2800*2200mm |
| 3 |
One unit JK12RD dryer + drying chamber |
1000Kg / batch |
6000*3000*2200mm |
| 4 |
Two units JK03RD dryers + drying chamber |
800Kg / batch |
7000*2200*2200mm |
| 5 |
Two units JK06RD dryers + drying chamber |
1500Kg / batch |
10000*2800*2200mm |
| 6 |
Two units JK12RD dryers + drying chamber |
2500Kg / batch |
10000*3000*2200mm |
Warm prompt: We can make any drying chamber sizes as your required.
If you are interested in our heat pump dryer, please contact us for more information, such as catalogue, video,etc.
Meline
Add: Huadu District, Guangzhou City, Guangdong Province, P.R. China
Phone: +86-13697409461
Audited Supplier 
){kind=link}