KINKAI Heat pump dryer takes advantage of the reversed Carnot principle, absorbing the heat from around and sending the heat to the materials which will be dried. This kind of dryer is mainly composed of heat pump dryer and drying chamber. This dryer will be controlled by touch screen controller, and the temperature can be adjusted. It has low electric consumption.
Model: JK03RD, JK06RD, JK10RD
Power Supply: 220V/1PH/50HZ or 380V/3PH/50HZ
Type: 75% air source + 25% electric power
Max. Temp: 75ºC
Working Temp: -10~45ºC
Functions: Heating / Cooling / Dehumidify
Dryer Type: Batch Type
Principle
KINKAI heat pump dryer operates according to a basic reverse Carnot cycle. The working fluid(refrigerant) at low pressure is vaporized in the evaporator, by heat drawn from the dryer exhaust air. The compressor raises the enthalpy of the working fluid of the heat pump and discharges it as superheated vapor at high- pressure. Heat is removed from working fluid and returned to the process air at the condenser. The working fluid is then throttled to the low-pressure line(using an expansion valve) and enters the evaporator to complete the cycle. In the dryer system, hot and dry air at the exit of condenser is allowed to pass through the drying chamber where it gains latent heat from the material. The humid air at dryer exit then passes through the evaporator where condensation of moisture occurs as the air goes below dew point temperature. Then drain the condenser water.
Features
1. Different dry relative humidity can be controlled in different periods, and time, temperature and the like can be controlled;
2. The temperature difference between the upper and lower sides of the dryer is small to ensure uniform temperature;
3. Drying time ladder control, realizing automatic management;
4. Automatically adjust the drying time and temperature according to the multi-temperature section drying process setting, and intelligently control the temperature and humidity curve;
5. Drying at low humidity and constant temperature, the product after drying is of high quality, no cracking, good color, good nutrition, good rehydration and good quality;
6. High thermal efficiency and energy saving, no secondary pollution, in line with national food hygiene standards;
7. The machine has low noise, stable operation and convenient installation and maintenance;
8. Can be customized according to customer requirements.
Technical Parameters
Single Type
| MODEL |
UNIT |
JK03RD |
JK06RD |
JK12RD |
| POWER SUPPLY |
V/PH/HZ |
380V/3PH,50/60HZ |
380V/3PH,50/60HZ |
380V/3PH,50/60HZ |
| 220V/1PH,50/60HZ |
| RATED CURRENT |
A |
9.6A(380V),22A(220V) |
17.0 |
30.0 |
| HEATING CAPACITY |
KW |
10.5 |
21.0 |
42.0 |
| COOLING CAPACITY |
KW |
7.8 |
18.0 |
32.0 |
| DEHUMIDIFY |
L/H |
12.0 |
25.0 |
50.0 |
| TEMPERATURE |
C |
10-75 |
10-75 |
10-75 |
| NOISE |
dB(A) |
75 |
75 |
75 |
| ELECTRIC HEATER |
KW |
3.0 |
6.0 |
12.0 |
| DRYER DIMENSION |
MM |
1675X860X1280 |
1760X1060X1280 |
2120X1360X1590 |
| WEIGHT |
KG |
180 |
285 |
480 |
Double Type
| MODEL |
UNIT |
JK03RD |
JK06RD |
JK12RD |
| POWER SUPPLY |
V/PH/HZ |
380V/3PH,50/60HZ |
380V/3PH,50/60HZ |
380V/3PH,50/60HZ |
| 220V/1PH,50/60HZ |
| RATED CURRENT |
A |
19.2A(380V),44A(220V) |
34.0 |
60.0 |
| HEATING CAPACITY |
KW |
21.0 |
42.0 |
84.0 |
| COOLING CAPACITY |
KW |
15.6 |
36.0 |
64.0 |
| DEHUMIDIFY |
L/H |
24.0 |
50.0 |
100.0 |
| TEMPERATURE |
C |
10-75 |
10-75 |
10-75 |
| NOISE |
dB(A) |
75 |
75 |
75 |
| ELECTRIC HEATER |
KW |
3.0x2 |
6.0x2 |
12.0x2 |
| DRYER DIMENSION |
MM |
1675X860X1280 |
1760X1060X1280 |
2120X1360X1590 |
| WEIGHT |
KG |
180x2 |
285x2 |
480x2 |
Buying Guide
| Model |
Dryer Qty |
Product capacity |
Chamber Size |
Power Consumption |
| JK03RD |
Single |
300kg/ batch |
4000x2000x2200mm |
4.8kw |
| Double |
1300kg/ batch |
7000x2000x2200mm |
9.6kw |
| JK06RD |
Single |
600kg/ batch |
6000x2800x2200mm |
8.5kw |
| Double |
1500kg/ bacth |
10000x2800x2200mm |
17kw |
| JK12RD |
Single |
1000kg/ batch |
6000x3000x2200mm |
15kw |
| Double |
3500kg/ batch |
10000x3000x2200mm |
30kw |
Warm prompt: We can make any drying chamber sizes as your required.
FAQ
1. Does the KINKAI drying machine running by Gas or electricity or Diesel
Answer: Electricity only
2. Could I put my LOGO on the Dryers?
Answer: Yes,we can provide OEM service.
3. What is the material of drying machine cover ?
Answer: we can do SS304# or coat steel, sure,difference material with different price
4. What should I do if I am interested in your drying machine?
Answer: Thank you so much for your attention. Please don't hesitate to contact us by mail or by phone, telling us which one model, how many sets, drying capacity, and special requirements etc.
5. What are your main products of your company?
Answer: Heat pump dryers, heat pump(including air to water heat pumps, water to water heat pumps).
6. Could you give me your catalogue?
Answer: Yes, you can download it on website or send us email,we will send you asap.
Delivery and Package
For heat pump dryer parts---with plywood
For drying chamber +trolleys
If shipped with 20ft container or 40ft container, no packing
If shipped with LCL( less than container load), packed in plywood
Warm prompt: We can make any drying chamber sizes as your required.
Our service
1) OEM service
2) Supply spare parts according to order quantity.
3)Technical support for your installation, operation and maintenance.
4) One year's warranty, and you can pay for extended warranty.
5)Spare parts and technical support at most economic prices after the warranty.
After installation,during the guarantee period,our company will be responsible for problems caused by quality of production or raw material except the damageable spare parts of heat pump caused by incorrect man-made operation.
If you are interested in our heat pump dryer, please contact us for more information, such as catalogue, video,etc.
Audited Supplier 
){kind=link}