KINKAI Fruits and Vegetables Dehydration Machine Introduction
KINKAI third generation heat pump dryer type fruits and vegetables dehydration machine is a device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical energy, as in a refrigerator, circulating hot-air assures uniform drying and high efficiency.
Model: JK03RD, JK06RD, JK12RD
Power Supply: 220V/1PH/50HZ or 380V/3PH/50HZ
Type: 75% air source + 25% electric power
Max. Temp: 75ºC
Working Temp: -10~45ºC
Functions: Heating / Cooling / Dehumidify
Dryer Type: Batch Type
Working Principle
1, Dryer evaporator of refrigerant absorb the air from outside
2, then compressor works that make the air temperature rise
3, heat exchanger change the hot air into drying chamber
4, final vegetables/fruits/seafood/herbs will be dried by the hot air circulating in drying chamber
Features of KINKAI Fruits and Vegetables Dehydration Machine:
1, Energy saving
Adopt heat pump technology, absorb heat from air and recovery waste heat at the same time
Adopt close dehumidify + circulating drying type, saving operating cost;
2, Exact control temperature and humidity
The drying temperature can be easily controlled by PLC +Touch Screen control system.
3, Uniform drying
By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so the raw materials can be dried evenly
4, The temperature: 10-75°C, Max 75°C, similar nature drying.
5, The baking plate dimensions and materials can customize as customer request.
6, Good drying quality.
During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good rehydration, keep nutrient content;
7, Safe and reliable operation
Automatic intelligent control, 24-hour continuous drying; Without waste gas and waste heat pollution,low noise
Technical Parameters
| Single Dryer + Drying Chamber |
| Model |
Unit |
JK03RD |
JK06RD |
JK12RD |
| Power Input |
KW |
4.8 |
8.5 |
15 |
| Power Supply |
V/PH/HZ |
380V/3PH, 50/60HZ |
380V/3PH, 50/60HZ |
| 220V/1PH, 50/60HZ |
| Rated Current |
A |
9.6A(380V), 22A(220V) |
17 |
30 |
| Heating Capacity |
KW |
10.5 |
21 |
42 |
| Cooling Capacity |
KW |
7.8 |
18 |
32 |
| Dehumidify |
L/H |
12 |
25 |
50 |
| Max. Temperature |
ºC |
≤75 |
≤75 |
≤75 |
| Working Condition |
ºC |
0-43 |
0-43 |
0-43 |
| Electric Shock Protection Grade |
I |
I |
I |
| Max. Exhause Pressure |
Mpa |
3 |
3 |
3 |
| Noise |
dB(A) |
75 |
75 |
75 |
| Power Consumption/ H |
KWH |
4.8 |
8.5 |
15 |
| Electric Heater |
KW |
3 |
6 |
12 |
| Blowing Type |
/ |
Horizontal Blowing 360ºC |
| Dimension Of Dryer |
MM |
1675x860x1280 |
1760x1060x1280 |
2120x1360x1590 |
| Weight |
KG |
295 |
385 |
540 |
Recommend Dryer+Drying Chamber Sizes
| Item |
Description |
Product Capacity |
Drying Chamber size |
| 1 |
One unit JK03RD dryer + drying chamber |
300Kg / batch |
4000*2000*2200mm |
| 2 |
One unit JK06RD dryer + drying chamber |
600Kg / batch |
6000*2800*2200mm |
| 3 |
One unit JK12RD dryer + drying chamber |
1000Kg / batch |
6000*3000*2200mm |
| 4 |
Two units JK03RD dryers + drying chamber |
1200Kg / batch |
7000*2200*2200mm |
| 5 |
Two units JK06RD dryers + drying chamber |
1500Kg / batch |
10000*2800*2200mm |
| 6 |
Two units JK12RD dryers + drying chamber |
2500Kg / batch |
10000*3000*2200mm |
Warm prompt: We can make any drying chamber sizes as your required.
If you are interested in our heat pump dryer, please contact us for more information, such as catalogue, video,etc.
Meline
Add: Huadu District, Guangzhou City, Guangdong Province, P.R. China
Phone: +86-13697409461
Audited Supplier 
){kind=link}