Automatic Heat Pump Dryer Industrial Fruit Drying Machine

• Type: Dehydrator
• Voltage: 220V/ 380V
• Power: 5.5kw
• Customized: Drying Chamber Room
• Control System: PLC+Touch Screen
• Certification: CCC, Ce, ISO
• Model NO.: JK03RD
• Raw Material: 201/304 Stainless Steel/Steel
• Function: Heating/Dehumidify
• Dimension of Chamber: 3160*2070*2200mm
• Transport Package: Plywood
• Specification: 1650*856*1280MM
• Trademark: KINKAI
• Origin: Guangdong, China
• HS Code: 8419399090
• Production Capacity: 700sets/Per Month

Product Description

Certification

Product Component

Main Engine Component

How does it work
1, Dryer evaporator of refrigerant absorb the air from outside
2, then compressor works that make the air temperature rise
3, heat exchanger change the hot air into drying chamber
4, final fruits will be dried by the hot air circulating in drying chamber

Mango Drying Project

1. Select fresh ripe mangoes: Li Song mango, Zi Hua mango and wild mangoes grown in Hainan are suitable for processing. Full pulp contributes to the rate of finished products. It would better that mangoes are nearly ripe. If the maturity is low, mangoes taste bad with poor color. They are perishable in case of post-maturity.

2. Washing: Put mangoes in the tank, rinse them with clear water flow, select unqualified ones, put qualified ones in the plastic baskets by size, and strain water.

3. Peeling: Use a stainless steel knife to remove exocarp and scars by hand. Make sure the surface is smooth and even and all exocarp is removed. If not, tannin in the exocarp is easy to get brown in the process, which has a negative impact on color of finished products. Use a sharp blade to cut peeled mangoes into slices on a vertical basis. Each slice is 8-10 mm thick. The kernel still with some pulp can be made into juice.

4. Color protection: Use sulfur to smoke or soak slices to protect their color.

5. Drying: Put the mango slices on the rack (if soaked with sulfur, strain water first), and put the rack in the cabinet to dry the mango slices up.

6. At the beginning, the temperature shall be held at 70-75°C. In the later phase, the temperature shall be at 60-65°C. Pay attention to turning over and rewetting in the drying process.

7. Softening and packaging: If moisture content of mango slices meets the desired level, typically 15-18%, put them in the closed container for 2-3 days to soften them and make water balanced for packaging.

Technical Parameters 

Single dryer + Drying chamber
Model	Unit	JK03RD	JK06RD	JK12RD
Power input	KW	5.5	9.5	19.4
Power supply	V/PH/ HZ	380V3PH,50/60HZ 220V/1PH,50/60HZ	380V/3PH,50/60HZ
Rated current	A	11A(380V),25A(220V)	19.0	39.0
Heating capacity	KW	10.5	21.0	42.0
Cooling capacity	KW	7.8	18.0	32.0
Dehumidify	L/H	12.0	25.0	50.0
Max temperature	ºC	<75	<75	<75
Working condition	ºC	0-43	0-43	0-43
Electric shock protection grade		I	I	I
Max exhause pressure	Mpa	3.0	3.0	3.0
Noise	dB(A)	75	75	75
Power consumption	KWH	4.8	8.5	15.0
Electric heater	KW	3.0	6.0	12.0
Blowing type	/	HORIZONTAL BLOWING 360°
Dimension of dryer	MM	1650x856x1280	1650x1056x1280	2250x1360x1590
Weight	KG	180	285	480

 

Double dryer + Drying chamber
Model	Unit	JK03RD(*2)	JK06RD(*2)	JK12RD(*2)
Power input	KW	11.0	18.4	32.8
Power supply	V/PH/ HZ	380V3PH,50/60HZ 220V/1PH,50/60HZ	380V/3PH,50/60HZ
Rated current	A	22A(380V),50A(220V)	37.0	66.0
Heating capacity	KW	21.0	42.0	84.0
Cooling capacity	KW	15.6	36.0	64.0
Dehumidify	L/H		50.0	100.0
Max temperature	ºC		<=75	<=75
Working condition	ºC	0-43	0-43	0-43
Electric shock protection grade		I	I	I
Max exhause pressure	Mpa	3.0	3.0	3.0
Noise	dB(A)	<=75	<=75	<=75
Power consumption	KWH	9.6	17.0	30.0
Electric heater	KW	6.0	12.0	24.0
Blowing type	/	HORIZONTAL BLOWING 360°
Dimension of dryer	MM	1650x856x1280	1650x1056x1280	2250x1360x1590
Weight	KG	180(*2)	285(*2)	480(*2)

 

Recommend Dryer + Drying Chamber Sizes
Item	Description	Product Capacity	Drying Chamber Sizes
1	One unit JK03RD dryer+drying chamber	300KG/batch	3160*2070*2200mm
2	One unit JK06RD dryer+drying chamber	600KG/batch	5700*2170*2200mm
3	One unit JK12RD dryer+drying chamber	1200KG/batch	5810*3230*2200mm
4	Two unit JK03RD dryer+drying chamber	800KG/batch	7510*2070*2200mm
5	Two unit JK06RD dryer+drying chamber	1500KG/batch	10530*2170*2200mm
6	Two unit JK12RD dryer+drying chamber	3000KG/batch	10750*3230*2200mm

Delivery and Package

Our Service
A. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)
B. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
C. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year's warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
If you are interested in our drying machine products, please feel free to contact us.