| Customization: | Available |
|---|---|
| Type: | Dehydrator |
| Voltage: | 220V/ 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
KINKAI company was founded in 2008, KINKAI company professional manufacture: heat pump dryer, water to water heat pump, air to water heat pump, swimming pool heat pump, KINKAI company has many years of manufacturing experience and talent reserves, KINKAI got more patented technologies and honor, the product has passed the international quality management system ISO9001:2000 certification, production license, CCC, CE certification and many other certification authority of the State quality and technical Supervision departments identified and quality inspection, and was included in the national "focus on promoting national scientific and technological achievements" and "national key new product plan", was designated " high efficiency heat pump water heating equipment" technical support unit of the Ministry of Science. Products sold around the world has won very good feedback from the European and American customers, high customer satisfaction, KINKAI products widely used in various industries drying, heating swimming pool, house cooling, heating and domestic hot water etc.
Certification
| Preheating: If we directly put red dates in the environment where the temperature is suitable for sugar inversion, the cell orifice in the skin will shrink and their crust will become hard, preventing water from evaporating because the extreme temperature difference makes red dates set off the protective reaction. First, preheat the cabinet completely on a gradual basis to evaporate most of water; and dry red dates at 35°C for 6-10 hours. When the temperature of red dates reaches 45°C, that is, your finger feels hot when touching it, dry them for 7-8 hours. After that, use your finger to press the red date and its skin wrinkles. When the temperature is at 45-48°C, there will be some small water drops on their skin. |
| Evaporation: Raise the temperature to 65°C (Note: the temperature shall not be higher than 70°C) within 8-12 hours to evaporate most of free water. Removal of moisture contributes to water evaporation. Keep the indoor temperature stable for constant evaporation. The drying process goes well in case the skin wrinkles. |
| Drying up: When the temperature in the red date is well-distributed, this phase will end within 6 hours. In this phase, moisture content of red dates is not high, and thus more attention shall be paid to temperature control. It is better that the temperature is held at 50°C. At this moment, the humanity has been reduced. If the humanity is higher than 60%, dehumidify a little. Water in red dates become balanced, and red dates are dried well. Note that the dried red dates shall be taken out in time. |
| Cooling: Keep good ventilation and heat dissipation for dried red dates. Pile them up until being cooled. If the dried red dates are just taken out from the cabinet, and directly piled up in the warehouse, their sugars will ferment and go bad, and the pectose will be broken down into pectin and pectic acid due to high heat. Red dates become very soft, and some acid threads are available due to change of sugars. Therefore, don't store dried red dates after they are cooled completely. |
Main Engine Component
Technical Parameters
| Single dryer + Drying chamber | ||||
| Model | Unit | JK03RD | JK06RD | JK12RD |
| Power input | KW | 5.5 | 9.5 | 19.4 |
| Power supply | V/PH/ HZ | 380V3PH,50/60HZ 220V/1PH,50/60HZ |
380V/3PH,50/60HZ | |
| Rated current | A | 11A(380V),25A(220V) | 19.0 | 39.0 |
| Heating capacity | KW | 10.5 | 21.0 | 42.0 |
| Cooling capacity | KW | 7.8 | 18.0 | 32.0 |
| Dehumidify | L/H | 12.0 | 25.0 | 50.0 |
| Max temperature | ºC | <75 | <75 | <75 |
| Working condition | ºC | 0-43 | 0-43 | 0-43 |
| Electric shock protection grade | I | I | I | |
| Max exhause pressure | Mpa | 3.0 | 3.0 | 3.0 |
| Noise | dB(A) | 75 | 75 | 75 |
| Power consumption | KWH | 4.8 | 8.5 | 15.0 |
| Electric heater | KW | 3.0 | 6.0 | 12.0 |
| Blowing type | / | HORIZONTAL BLOWING 360° | ||
| Dimension of dryer | MM | 1650x856x1280 | 1650x1056x1280 | 2250x1360x1590 |
| Weight | KG | 180 | 285 | 480 |
| Double dryer + Drying chamber | ||||
| Model | Unit | JK03RD(*2) | JK06RD(*2) | JK12RD(*2) |
| Power input | KW | 11.0 | 18.4 | 32.8 |
| Power supply | V/PH/ HZ | 380V3PH,50/60HZ 220V/1PH,50/60HZ |
380V/3PH,50/60HZ | |
| Rated current | A | 22A(380V),50A(220V) | 37.0 | 66.0 |
| Heating capacity | KW | 21.0 | 42.0 | 84.0 |
| Cooling capacity | KW | 15.6 | 36.0 | 64.0 |
| Dehumidify | L/H | 50.0 | 100.0 | |
| Max temperature | ºC | <=75 | <=75 | |
| Working condition | ºC | 0-43 | 0-43 | 0-43 |
| Electric shock protection grade | I | I | I | |
| Max exhause pressure | Mpa | 3.0 | 3.0 | 3.0 |
| Noise | dB(A) | <=75 | <=75 | <=75 |
| Power consumption | KWH | 9.6 | 17.0 | 30.0 |
| Electric heater | KW | 6.0 | 12.0 | 24.0 |
| Blowing type | / | HORIZONTAL BLOWING 360° | ||
| Dimension of dryer | MM | 1650x856x1280 | 1650x1056x1280 | 2250x1360x1590 |
| Weight | KG | 180(*2) | 285(*2) | 480(*2) |
| Recommend Dryer + Drying Chamber Sizes | |||
| Item | Description | Product Capacity | Drying Chamber Sizes |
| 1 | One unit JK03RD dryer+drying chamber | 300KG/batch | 3160*2070*2200mm |
| 2 | One unit JK06RD dryer+drying chamber | 600KG/batch | 5700*2170*2200mm |
| 3 | One unit JK12RD dryer+drying chamber | 1200KG/batch | 5810*3230*2200mm |
| 4 | Two unit JK03RD dryer+drying chamber | 800KG/batch | 7510*2070*2200mm |
| 5 | Two unit JK06RD dryer+drying chamber | 1500KG/batch | 10530*2170*2200mm |
| 6 | Two unit JK12RD dryer+drying chamber | 3000KG/batch | 10750*3230*2200mm |
){kind=link}